bluetooth not working in recent current

[Graham Menhennitt]

I've been running 11-current AMD64 on this machine for about a year. It
has a bluetooth dongle that has worked correctly up until a week ago. I
updated to the latest source around then, so I presume that's what broke it.

I have
ng_ubt_load="YES"
in /boot/loader.conf, and
bluetooth_enable="YES"
in /etc/rc.conf.

In dmesg, I can see
ubt0: <Broadcom USB Bluetooth Dongle, class 224/1, rev 1.10/0.01,
addr 2> on usbus6
and when I do
# ngctl list
There are 7 total nodes:
Name: ubt0 Type: ubt ID: 00000001 Num
hooks: 0
Name: ngctl1336 Type: socket ID: 00000022 Num
hooks: 0
Name: btsock_hci_raw Type: btsock_hci_raw ID: 00000002 Num
hooks: 0
Name: btsock_l2c_raw Type: btsock_l2c_raw ID: 00000003 Num
hooks: 0
Name: btsock_l2c Type: btsock_l2c ID: 00000004 Num
hooks: 0
Name: btsock_sco Type: btsock_sco ID: 00000005 Num
hooks: 0
Name: re0 Type: ether ID: 00000013 Num
hooks: 0

But
# hccontrol -n ubt0hci inquiry
hccontrol: Could not find HCI nodes

Output of kldstat, and my kernel config are below.

Could somebody please give me a clue.

Thanks in advance for any help,
Graham




Id Refs Address Size Name
1 39 0xffffffff80200000 13c26b0 kernel
2 1 0xffffffff815c4000 a2d0 ng_ubt.ko
3 2 0xffffffff815cf000 13b08 ng_hci.ko
4 4 0xffffffff815e3000 3328 ng_bluetooth.ko
5 8 0xffffffff815e7000 1a748 netgraph.ko
6 1 0xffffffff81602000 b67618 nvidia.ko
7 3 0xffffffff8216a000 6ef80 vboxdrv.ko
8 1 0xffffffff82421000 2a06 uhid.ko
9 1 0xffffffff82424000 e233 ng_l2cap.ko
10 1 0xffffffff82433000 1ce60 ng_btsocket.ko
11 1 0xffffffff82450000 3c04 ng_socket.ko
12 1 0xffffffff82454000 3725 ums.ko
13 1 0xffffffff82458000 3e0e uplcom.ko
14 1 0xffffffff8245c000 54b8 ucom.ko
15 2 0xffffffff82462000 2a0f vboxnetflt.ko
16 1 0xffffffff82465000 4374 ng_ether.ko
17 1 0xffffffff8246a000 3f86 vboxnetadp.ko

include GENERIC
ident starker

nooptions QUOTA # Enable disk quotas for UFS
nooptions MD_ROOT # MD is a potential root device
nooptions NFS_ROOT # NFS usable as /, requires NFSCL
#nooptions COMPAT_FREEBSD32 # Compatible with i386 binaries
nooptions COMPAT_FREEBSD4 # Compatible with FreeBSD4
nooptions COMPAT_FREEBSD5 # Compatible with FreeBSD5
nooptions COMPAT_FREEBSD6 # Compatible with FreeBSD6
nooptions COMPAT_FREEBSD7 # Compatible with FreeBSD7
#nooptions SYSVSHM # SYSV-style shared memory
#nooptions SYSVMSG # SYSV-style message queues
#nooptions SYSVSEM # SYSV-style semaphores
nooptions XENHVM

nodevice fdc
#nodevice ahci # AHCI-compatible SATA
controllers
nodevice mvs # Marvell
88SX50XX/88SX60XX/88SX70XX/SoC SATA
nodevice siis # SiliconImage
SiI3124/SiI3132/SiI3531 SATA
nodevice ahc # AHA2940 and onboard
AIC7xxx devices
nodevice ahd # AHA39320/29320 and
onboard AIC79xx devices
nodevice esp # AMD Am53C974 (Tekram
DC-390(T))
nodevice hptiop # Highpoint RocketRaid
3xxx series
nodevice isp # Qlogic family
nodevice mpt # LSI-Logic MPT-Fusion
nodevice mps # LSI-Logic MPT-Fusion 2
nodevice mpr # LSI-Logic MPT-Fusion 3
nodevice sym # NCR/Symbios Logic
(newer chipsets + those of `ncr')
nodevice trm # Tekram DC395U/UW/F
DC315U adapters
nodevice adv # Advansys SCSI adapters
nodevice adw # Advansys wide SCSI
adapters
nodevice aic # Adaptec 15[012]x SCSI
adapters, AIC-6[23]60.
nodevice bt # Buslogic/Mylex
MultiMaster SCSI adapters
nodevice isci # Intel C600 SAS controller
nodevice ch # SCSI media changers
#nodevice da # Direct Access (disks)
nodevice sa # Sequential Access
(tape etc)
#nodevice cd # CD
#nodevice pass # Passthrough device
(direct ATA/SCSI access)
nodevice ses # Enclosure Services
(SES and SAF-TE)
nodevice amr # AMI MegaRAID
nodevice arcmsr # Areca SATA II RAID
nodevice ciss # Compaq Smart RAID 5*
nodevice dpt # DPT Smartcache III, IV
- See NOTES for options
nodevice hptmv # Highpoint RocketRAID 182x
nodevice hptnr # Highpoint DC7280, R750
nodevice hptrr # Highpoint RocketRAID
17xx, 22xx, 23xx, 25xx
nodevice hpt27xx # Highpoint RocketRAID 27xx
nodevice iir # Intel Integrated RAID
nodevice ips # IBM (Adaptec) ServeRAID
nodevice mly # Mylex
AcceleRAID/eXtremeRAID
nodevice twa # 3ware 9000 series
PATA/SATA RAID
nodevice tws # LSI 3ware 9750
SATA+SAS 6Gb/s RAID controller
nodevice aac # Adaptec FSA RAID
nodevice aacp # SCSI passthrough for
aac (requires CAM)
nodevice aacraid # Adaptec by PMC RAID
nodevice ida # Compaq Smart RAID
nodevice mfi # LSI MegaRAID SAS
nodevice mlx # Mylex DAC960 family
nodevice mrsas # LSI/Avago MegaRAID
SAS/SATA, 6Gb/s and 12Gb/s
nodevice twe # 3ware ATA RAID
nodevice atkbdc # AT keyboard controller
nodevice atkbd # AT keyboard
nodevice psm # PS/2 mouse
#nodevice kbdmux # keyboard multiplexer
nodevice cbb # cardbus (yenta) bridge
nodevice pccard # PC Card (16-bit) bus
nodevice cardbus # CardBus (32-bit) bus
nodevice ppc
nodevice ppbus # Parallel port bus
(required)
nodevice lpt # Printer
nodevice ppi # Parallel port
interface device
nodevice puc # Multi I/O cards and
multi-channel UARTs
nodevice bxe # Broadcom NetXtreme II
BCM5771X/BCM578XX 10GbE
nodevice de # DEC/Intel DC21x4x
(``Tulip'')
nodevice em # Intel PRO/1000 Gigabit
Ethernet Family
nodevice igb # Intel PRO/1000 PCIE
Server Gigabit Family
nodevice ixgbe # Intel PRO/10GbE PCIE
Ethernet Family
nodevice ixl # Intel XL710 40Gbe PCIE
Ethernet
nodevice ixlv # Intel XL710 40Gbe VF
PCIE Ethernet
nodevice le # AMD Am7900 LANCE and
Am79C9xx PCnet
nodevice ti # Alteon Networks Tigon
I/II gigabit Ethernet
nodevice txp # 3Com 3cR990 (``Typhoon'')
nodevice vx # 3Com 3c590, 3c595
(``Vortex'')
nodevice ae # Attansic/Atheros L2
FastEthernet
nodevice age # Attansic/Atheros L1
Gigabit Ethernet
nodevice alc # Atheros AR8131/AR8132
Ethernet
nodevice ale # Atheros
AR8121/AR8113/AR8114 Ethernet
nodevice bce # Broadcom
BCM5706/BCM5708 Gigabit Ethernet
nodevice bfe # Broadcom BCM440x
10/100 Ethernet
nodevice bge # Broadcom BCM570xx
Gigabit Ethernet
nodevice cas # Sun Cassini/Cassini+
and NS DP83065 Saturn
nodevice dc # DEC/Intel 21143 and
various workalikes
nodevice et # Agere ET1310
10/100/Gigabit Ethernet
nodevice fxp # Intel EtherExpress
PRO/100B (82557, 82558)
nodevice gem # Sun GEM/Sun ERI/Apple GMAC
nodevice hme # Sun HME (Happy Meal
Ethernet)
nodevice jme # JMicron JMC250
Gigabit/JMC260 Fast Ethernet
nodevice lge # Level 1 LXT1001
gigabit Ethernet
nodevice msk # Marvell/SysKonnect
Yukon II Gigabit Ethernet
nodevice nfe # nVidia nForce MCP
on-board Ethernet
nodevice nge # NatSemi DP83820
gigabit Ethernet
nodevice pcn # AMD Am79C97x PCI
10/100 (precedence over 'le')
nodevice rl # RealTek 8129/8139
nodevice sf # Adaptec AIC-6915
(``Starfire'')
nodevice sge # Silicon Integrated
Systems SiS190/191
nodevice sis # Silicon Integrated
Systems SiS 900/SiS 7016
nodevice sk # SysKonnect SK-984x &
SK-982x gigabit Ethernet
nodevice ste # Sundance ST201 (D-Link
DFE-550TX)
nodevice stge # Sundance/Tamarack
TC9021 gigabit Ethernet
nodevice tl # Texas Instruments
ThunderLAN
nodevice tx # SMC EtherPower II
(83c170 ``EPIC'')
nodevice vge # VIA VT612x gigabit
Ethernet
nodevice vr # VIA Rhine, Rhine II
nodevice wb # Winbond W89C840F
nodevice xl # 3Com 3c90x
(``Boomerang'', ``Cyclone'')
nodevice cs # Crystal Semiconductor
CS89x0 NIC
nodevice ed # NE[12]000, SMC Ultra,
3c503, DS8390 cards
nodevice ex # Intel EtherExpress
Pro/10 and Pro/10+
nodevice ep # Etherlink III based cards
nodevice fe # Fujitsu MB8696x based
cards
nodevice sn # SMC's 9000 series of
Ethernet chips
nodevice xe # Xircom pccard Ethernet
nodevice wlan # 802.11 support
nodevice wlan_wep # 802.11 WEP support
nodevice wlan_ccmp # 802.11 CCMP support
nodevice wlan_tkip # 802.11 TKIP support
nodevice wlan_amrr # AMRR transmit rate
control algorithm
nodevice an # Aironet 4500/4800
802.11 wireless NICs.
nodevice ath # Atheros NICs
nodevice ath_pci # Atheros pci/cardbus glue
nodevice ath_hal # pci/cardbus chip support
nodevice ath_rate_sample # SampleRate tx rate
control for ath
nodevice ipw # Intel 2100 wireless NICs.
nodevice iwi # Intel
2200BG/2225BG/2915ABG wireless NICs.
nodevice iwn # Intel
4965/1000/5000/6000 wireless NICs.
nodevice malo # Marvell Libertas
wireless NICs.
nodevice mwl # Marvell 88W8363
802.11n wireless NICs.
nodevice ral # Ralink Technology
RT2500 wireless NICs.
nodevice wi #
WaveLAN/Intersil/Symbol 802.11 wireless NICs.
nodevice wpi # Intel 3945ABG wireless
NICs.
#nodevice sound # Generic sound driver
(required)
nodevice snd_cmi # CMedia CMI8338/CMI8738
nodevice snd_csa # Crystal Semiconductor
CS461x/428x
nodevice snd_emu10kx # Creative SoundBlaster
Live! and Audigy
nodevice snd_es137x # Ensoniq AudioPCI ES137x
#nodevice snd_hda # Intel High Definition
Audio
nodevice snd_ich # Intel, NVidia and
other ICH AC'97 Audio
nodevice snd_via8233 # VIA VT8233x Audio
nodevice mmc # MMC/SD bus
nodevice mmcsd # MMC/SD memory card
nodevice sdhci # Generic PCI SD Host
Controller
nodevice virtio # Generic VirtIO bus
(required)
nodevice virtio_pci # VirtIO PCI device
nodevice vtnet # VirtIO Ethernet device
nodevice virtio_blk # VirtIO Block device
nodevice virtio_scsi # VirtIO SCSI device
nodevice virtio_balloon # VirtIO Memory Balloon
device
nodevice hyperv # HyperV drivers
nodevice xenpci # Xen HVM Hypervisor
services driver
nodevice vmx # VMware VMXNET3 Ethernet

[Maksim Yevmenkin]

Hi Graham

On Tue, May 24, 2016 at 1:31 AM, Graham Menhennitt

Post by Graham Menhennitt
I've been running 11-current AMD64 on this machine for about a year. It
has a bluetooth dongle that has worked correctly up until a week ago. I
updated to the latest source around then, so I presume that's what broke it.

can you please make sure that /etc/rc.d/bluetooth ran? it is usually
called from devd(8) in response to ubt(4) device arrival.

can you also please try to start it manually and see where it stops?
i.e. something like

# sh -x /etc/rc.d/bluetooth start ubt0

thanks!
max

[Graham Menhennitt]

Post by Maksim Yevmenkin
Hi Graham
On Tue, May 24, 2016 at 1:31 AM, Graham Menhennitt

Post by Graham Menhennitt
I've been running 11-current AMD64 on this machine for about a year. It
has a bluetooth dongle that has worked correctly up until a week ago. I
updated to the latest source around then, so I presume that's what broke it.

can you please make sure that /etc/rc.d/bluetooth ran? it is usually
called from devd(8) in response to ubt(4) device arrival.
can you also please try to start it manually and see where it stops?
i.e. something like
# sh -x /etc/rc.d/bluetooth start ubt0

Hi Max.

Thanks for responding. The output of that command is below. I'll do some
more diagnosis when I get home tonight.

Thanks,

Graham

# sh -x /etc/rc.d/bluetooth start ubt0
+ . /etc/rc.subr
+ : 32606
+ export RC_PID
+ [ -z '' ]
+ _rc_subr_loaded=YES
+ SYSCTL=/sbin/sysctl
+ SYSCTL_N='/sbin/sysctl -n'
+ SYSCTL_W=/sbin/sysctl
+ PROTECT=/usr/bin/protect
+ ID=/usr/bin/id
+ IDCMD='if [ -x /usr/bin/id ]; then /usr/bin/id -un; fi'
+ PS='/bin/ps -ww'
+ /bin/ps -ww -p 32606 -o 'jid='
+ JID=0
+ _rc_namevarlist='program chroot chdir env flags fib nice user group
groups prepend'
+ _rc_subr_loaded=:
+ name=bluetooth
+ desc='Bluetooth setup script'
+ rcvar=''
+ start_cmd=bluetooth_start
+ stop_cmd=bluetooth_stop
+ required_modules='ng_bluetooth ng_hci ng_l2cap ng_btsocket'
+ load_rc_config bluetooth
+ local _name _rcvar_val _var _defval _v _msg _new _d
+ _name=bluetooth
+ false
+ [ -r /etc/defaults/rc.conf ]
+ debug 'Sourcing /etc/defaults/rc.conf'
+ . /etc/defaults/rc.conf
+ rc_info=NO
+ rc_startmsgs=YES
+ rcshutdown_timeout=90
+ early_late_divider=FILESYSTEMS
+ always_force_depends=NO
+ apm_enable=NO
+ apmd_enable=NO
+ apmd_flags=''
+ ddb_enable=NO
+ ddb_config=/etc/ddb.conf
+ devd_enable=YES
+ devd_flags=''
+ kldxref_enable=NO
+ kldxref_clobber=NO
+ kldxref_module_path=''
+ powerd_enable=NO
+ powerd_flags=''
+ tmpmfs=AUTO
+ tmpsize=20m
+ tmpmfs_flags=-S
+ varmfs=AUTO
+ varsize=32m
+ varmfs_flags=-S
+ populate_var=AUTO
+ cleanvar_enable=YES
+ local_startup=/usr/local/etc/rc.d
+ script_name_sep=' '
+ rc_conf_files='/etc/rc.conf /etc/rc.conf.local'
+ zfs_enable=NO
+ gptboot_enable=YES
+ gbde_autoattach_all=NO
+ gbde_devices=NO
+ gbde_attach_attempts=3
+ gbde_lockdir=/etc
+ geli_devices=''
+ geli_tries=''
+ geli_default_flags=''
+ geli_autodetach=YES
+ root_rw_mount=YES
+ root_hold_delay=30
+ fsck_y_enable=NO
+ fsck_y_flags=''
+ background_fsck=YES
+ background_fsck_delay=60
+ netfs_types='nfs:NFS smbfs:SMB'
+ extra_netfs_types=NO
+ hostname=''
+ hostid_enable=YES
+ hostid_file=/etc/hostid
+ nisdomainname=NO
+ dhclient_program=/sbin/dhclient
+ dhclient_flags=''
+ background_dhclient=NO
+ synchronous_dhclient=NO
+ defaultroute_delay=30
+ defaultroute_carrier_delay=5
+ netif_enable=YES
+ netif_ipexpand_max=2048
+ wpa_supplicant_program=/usr/sbin/wpa_supplicant
+ wpa_supplicant_flags=-s
+ wpa_supplicant_conf_file=/etc/wpa_supplicant.conf
+ firewall_enable=NO
+ firewall_script=/etc/rc.firewall
+ firewall_type=UNKNOWN
+ firewall_quiet=NO
+ firewall_logging=NO
+ firewall_logif=NO
+ firewall_flags=''
+ firewall_coscripts=''
+ firewall_client_net=192.0.2.0/24
+ firewall_simple_iif=ed1
+ firewall_simple_inet=192.0.2.16/28
+ firewall_simple_oif=ed0
+ firewall_simple_onet=192.0.2.0/28
+ firewall_myservices=''
+ firewall_allowservices=''
+ firewall_trusted=''
+ firewall_logdeny=NO
+ firewall_nologports='135-139,445 1026,1027 1433,1434'
+ firewall_nat_enable=NO
+ firewall_nat_interface=''
+ firewall_nat_flags=''
+ dummynet_enable=NO
+ ip_portrange_first=NO
+ ip_portrange_last=NO
+ ike_enable=NO
+ ike_program=/usr/local/sbin/isakmpd
+ ike_flags=''
+ ipsec_enable=NO
+ ipsec_file=/etc/ipsec.conf
+ natd_program=/sbin/natd
+ natd_enable=NO
+ natd_interface=''
+ natd_flags=''
+ ipfilter_enable=NO
+ ipfilter_program=/sbin/ipf
+ ipfilter_rules=/etc/ipf.rules
+ ipfilter_flags=''
+ ipnat_enable=NO
+ ipnat_program=/sbin/ipnat
+ ipnat_rules=/etc/ipnat.rules
+ ipnat_flags=''
+ ipmon_enable=NO
+ ipmon_program=/sbin/ipmon
+ ipmon_flags=-Ds
+ ipfs_enable=NO
+ ipfs_program=/sbin/ipfs
+ ipfs_flags=''
+ pf_enable=NO
+ pf_rules=/etc/pf.conf
+ pf_program=/sbin/pfctl
+ pf_flags=''
+ pflog_enable=NO
+ pflog_logfile=/var/log/pflog
+ pflog_program=/sbin/pflogd
+ pflog_flags=''
+ ftpproxy_enable=NO
+ ftpproxy_flags=''
+ pfsync_enable=NO
+ pfsync_syncdev=''
+ pfsync_syncpeer=''
+ pfsync_ifconfig=''
+ tcp_extensions=YES
+ log_in_vain=0
+ tcp_keepalive=YES
+ tcp_drop_synfin=NO
+ icmp_drop_redirect=NO
+ icmp_log_redirect=NO
+ network_interfaces=auto
+ cloned_interfaces=''
+ sppp_interfaces=''
+ ppp_enable=NO
+ ppp_program=/usr/sbin/ppp
+ ppp_mode=auto
+ ppp_nat=YES
+ ppp_profile=papchap
+ ppp_user=root
+ hostapd_enable=NO
+ syslogd_enable=YES
+ syslogd_program=/usr/sbin/syslogd
+ syslogd_flags=-s
+ syslogd_oomprotect=YES
+ altlog_proglist=''
+ inetd_enable=NO
+ inetd_program=/usr/sbin/inetd
+ inetd_flags='-wW -C 60'
+ iscsid_enable=NO
+ iscsictl_enable=NO
+ iscsictl_flags=-Aa
+ hastd_enable=NO
+ hastd_program=/sbin/hastd
+ hastd_flags=''
+ ctld_enable=NO
+ local_unbound_enable=NO
+ kdc_enable=NO
+ kdc_program=/usr/libexec/kdc
+ kdc_flags=''
+ kadmind_enable=NO
+ kadmind_program=/usr/libexec/kadmind
+ kpasswdd_enable=NO
+ kpasswdd_program=/usr/libexec/kpasswdd
+ kfd_enable=NO
+ kfd_program=/usr/libexec/kfd
+ kfd_flags=''
+ ipropd_master_enable=NO
+ ipropd_master_program=/usr/libexec/ipropd-master
+ ipropd_master_flags=''
+ ipropd_master_keytab=/etc/krb5.keytab
+ ipropd_master_slaves=''
+ ipropd_slave_enable=NO
+ ipropd_slave_program=/usr/libexec/ipropd-slave
+ ipropd_slave_flags=''
+ ipropd_slave_keytab=/etc/krb5.keytab
+ ipropd_slave_master=''
+ gssd_enable=NO
+ gssd_program=/usr/sbin/gssd
+ gssd_flags=''
+ rwhod_enable=NO
+ rwhod_flags=''
+ rarpd_enable=NO
+ rarpd_flags=-a
+ bootparamd_enable=NO
+ bootparamd_flags=''
+ pppoed_enable=NO
+ pppoed_provider='*'
+ pppoed_flags='-P /var/run/pppoed.pid'
+ pppoed_interface=fxp0
+ sshd_enable=NO
+ sshd_program=/usr/sbin/sshd
+ sshd_flags=''
+ ftpd_enable=NO
+ ftpd_program=/usr/libexec/ftpd
+ ftpd_flags=''
+ amd_enable=NO
+ amd_program=/usr/sbin/amd
+ amd_flags='-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map'
+ amd_map_program=NO
+ autofs_enable=NO
+ automount_flags=''
+ automountd_flags=''
+ autounmountd_flags=''
+ nfs_client_enable=NO
+ nfs_access_cache=60
+ nfs_server_enable=NO
+ nfs_server_flags='-u -t'
+ nfs_server_managegids=NO
+ mountd_enable=NO
+ mountd_flags='-r -S'
+ weak_mountd_authentication=NO
+ nfs_reserved_port_only=NO
+ nfs_bufpackets=''
+ rpc_lockd_enable=NO
+ rpc_lockd_flags=''
+ rpc_statd_enable=NO
+ rpc_statd_flags=''
+ rpcbind_enable=NO
+ rpcbind_program=/usr/sbin/rpcbind
+ rpcbind_flags=''
+ rpc_ypupdated_enable=NO
+ keyserv_enable=NO
+ keyserv_flags=''
+ nfsv4_server_enable=NO
+ nfscbd_enable=NO
+ nfscbd_flags=''
+ nfsuserd_enable=NO
+ nfsuserd_flags=''
+ timed_enable=NO
+ timed_flags=''
+ ntpdate_enable=NO
+ ntpdate_program=/usr/sbin/ntpdate
+ ntpdate_flags=-b
+ ntpdate_config=/etc/ntp.conf
+ ntpdate_hosts=''
+ ntpd_enable=NO
+ ntpd_program=/usr/sbin/ntpd
+ ntpd_config=/etc/ntp.conf
+ ntpd_sync_on_start=NO
+ ntpd_flags='-p /var/run/ntpd.pid -f /var/db/ntpd.drift'
+ ntp_src_leapfile=/etc/ntp/leap-seconds
+ ntp_db_leapfile=/var/db/ntpd.leap-seconds.list
+ ntp_leapfile_sources=https://www.ietf.org/timezones/data/leap-seconds.list
+ ntp_leapfile_fetch_opts=-mq
+ ntp_leapfile_expiry_days=30
+ ntp_leapfile_fetch_verbose=NO
+ nis_client_enable=NO
+ nis_client_flags=''
+ nis_ypset_enable=NO
+ nis_ypset_flags=''
+ nis_server_enable=NO
+ nis_server_flags=''
+ nis_ypxfrd_enable=NO
+ nis_ypxfrd_flags=''
+ nis_yppasswdd_enable=NO
+ nis_yppasswdd_flags=''
+ bsnmpd_enable=NO
+ bsnmpd_flags=''
+ defaultrouter=NO
+ static_arp_pairs=''
+ static_ndp_pairs=''
+ static_routes=''
+ natm_static_routes=''
+ gateway_enable=NO
+ routed_enable=NO
+ routed_program=/sbin/routed
+ routed_flags=-q
+ arpproxy_all=NO
+ forward_sourceroute=NO
+ accept_sourceroute=NO
+ atm_enable=NO
+ atm_pvcs=''
+ atm_arps=''
+ hcsecd_enable=NO
+ hcsecd_config=/etc/bluetooth/hcsecd.conf
+ sdpd_enable=NO
+ sdpd_control=/var/run/sdp
+ sdpd_groupname=nobody
+ sdpd_username=nobody
+ bthidd_enable=NO
+ bthidd_config=/etc/bluetooth/bthidd.conf
+ bthidd_hids=/var/db/bthidd.hids
+ rfcomm_pppd_server_enable=NO
+ rfcomm_pppd_server_profile='one two'
+ rfcomm_pppd_server_one_channel=1
+ rfcomm_pppd_server_two_channel=3
+ ubthidhci_enable=NO
+ netwait_enable=NO
+ netwait_timeout=60
+ netwait_if_timeout=30
+ icmp_bmcastecho=NO
+ ipv6_network_interfaces=auto
+ ipv6_activate_all_interfaces=NO
+ ipv6_defaultrouter=NO
+ ipv6_static_routes=''
+ ipv6_gateway_enable=NO
+ ipv6_cpe_wanif=NO
+ ipv6_privacy=NO
+ route6d_enable=NO
+ route6d_program=/usr/sbin/route6d
+ route6d_flags=''
+ ipv6_default_interface=NO
+ rtsol_flags=''
+ rtsold_enable=NO
+ rtsold_flags=-a
+ rtadvd_enable=NO
+ rtadvd_interfaces=''
+ mroute6d_enable=NO
+ mroute6d_program=/usr/local/sbin/pim6dd
+ mroute6d_flags=''
+ stf_interface_ipv4addr=''
+ stf_interface_ipv4plen=0
+ stf_interface_ipv6_ifid=0:0:0:1
+ stf_interface_ipv6_slaid=0000
+ ipv6_ipv4mapping=NO
+ ipv6_ipfilter_rules=/etc/ipf6.rules
+ ip6addrctl_enable=YES
+ ip6addrctl_verbose=NO
+ ip6addrctl_policy=AUTO
+ keyboard=''
+ keymap=NO
+ keyrate=NO
+ keybell=NO
+ keychange=NO
+ cursor=NO
+ scrnmap=NO
+ font8x16=NO
+ font8x14=NO
+ font8x8=NO
+ blanktime=300
+ saver=NO
+ moused_nondefault_enable=YES
+ moused_enable=NO
+ moused_type=auto
+ moused_port=/dev/psm0
+ moused_flags=''
+ mousechar_start=NO
+ allscreens_flags=''
+ allscreens_kbdflags=''
+ mta_start_script=/etc/rc.sendmail
+ sendmail_enable=NO
+ sendmail_pidfile=/var/run/sendmail.pid
+ sendmail_procname=/usr/sbin/sendmail
+ sendmail_flags='-L sm-mta -bd -q30m'
+ sendmail_cert_create=YES
+ sendmail_submit_enable=YES
+ sendmail_submit_flags='-L sm-mta -bd -q30m
-ODaemonPortOptions=Addr=localhost'
+ sendmail_outbound_enable=YES
+ sendmail_outbound_flags='-L sm-queue -q30m'
+ sendmail_msp_queue_enable=YES
+ sendmail_msp_queue_flags='-L sm-msp-queue -Ac -q30m'
+ sendmail_rebuild_aliases=NO
+ auditd_enable=NO
+ auditd_program=/usr/sbin/auditd
+ auditd_flags=''
+ auditdistd_enable=NO
+ auditdistd_program=/usr/sbin/auditdistd
+ auditdistd_flags=''
+ cron_enable=YES
+ cron_program=/usr/sbin/cron
+ cron_dst=YES
+ cron_flags=''
+ lpd_enable=NO
+ lpd_program=/usr/sbin/lpd
+ lpd_flags=''
+ nscd_enable=NO
+ chkprintcap_enable=NO
+ chkprintcap_flags=-d
+ dumpdev=AUTO
+ dumpdir=/var/crash
+ savecore_enable=YES
+ savecore_flags='-m 10'
+ crashinfo_enable=YES
+ crashinfo_program=/usr/sbin/crashinfo
+ quota_enable=NO
+ check_quotas=YES
+ quotaon_flags=-a
+ quotaoff_flags=-a
+ quotacheck_flags=-a
+ accounting_enable=NO
+ ibcs2_enable=NO
+ ibcs2_loaders=coff
+ firstboot_sentinel=/firstboot
+ sysvipc_enable=NO
+ linux_enable=NO
+ svr4_enable=NO
+ clear_tmp_enable=NO
+ clear_tmp_X=YES
+ ldconfig_insecure=NO
+ ldconfig_paths='/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg'
+ ldconfig32_paths='/usr/lib32 /usr/lib32/compat'
+ ldconfigsoft_paths='/usr/libsoft /usr/libsoft/compat /usr/local/libsoft'
+ ldconfig_paths_aout='/usr/lib/compat/aout /usr/local/lib/aout'
+ ldconfig_local_dirs=/usr/local/libdata/ldconfig
+ ldconfig_local32_dirs=/usr/local/libdata/ldconfig32
+ ldconfig_localsoft_dirs=/usr/local/libdata/ldconfigsoft
+ kern_securelevel_enable=NO
+ kern_securelevel=-1
+ update_motd=YES
+ entropy_boot_file=/boot/entropy
+ entropy_file=/entropy
+ entropy_dir=/var/db/entropy
+ entropy_save_sz=4096
+ entropy_save_num=8
+ harvest_mask=511
+ dmesg_enable=YES
+ watchdogd_enable=NO
+ watchdogd_flags=''
+ devfs_rulesets='/etc/defaults/devfs.rules /etc/devfs.rules'
+ devfs_system_ruleset=''
+ devfs_set_rulesets=''
+ devfs_load_rulesets=YES
+ performance_cx_lowest=C2
+ performance_cpu_freq=NONE
+ economy_cx_lowest=Cmax
+ economy_cpu_freq=NONE
+ virecover_enable=YES
+ ugidfw_enable=NO
+ bsdextended_script=/etc/rc.bsdextended
+ newsyslog_enable=YES
+ newsyslog_flags=-CN
+ mixer_enable=YES
+ opensm_enable=NO
+ rctl_enable=YES
+ rctl_rules=/etc/rctl.conf
+ iovctl_files=''
+ jail_enable=NO
+ jail_parallel_start=NO
+ jail_list=''
+ jail_reverse_stop=NO
+ [ -z '' ]
+ source_rc_confs_defined=yes
+ source_rc_confs
+ local i sourced_files
+ sourced_files=:/etc/rc.conf:
+ [ -r /etc/rc.conf ]
+ . /etc/rc.conf
+ hostname=starker
+ ifconfig_re0=DHCP
+ local_unbound_enable=YES
+ sshd_enable=YES
+ ntpd_enable=YES
+ ntpd_sync_on_start=YES
+ powerd_enable=YES
+ dumpdev=NO
+ hald_enable=YES
+ dbus_enable=YES
+ kdm4_enable=YES
+ background_fsck=NO
+ devfs_system_ruleset=system
+ rpcbind_enable=YES
+ nfs_client_enable=YES
+ nfs_server_enable=YES
+ rpc_statd_enable=YES
+ rpc_lockd_enable=YES
+ sendmail_enable=NONE
+ nullmailer_enable=YES
+ vboxnet_enable=YES
+ bluetooth_enable=YES
+ cupsd_enable=YES
+ sourced_files=:/etc/rc.conf::/etc/rc.conf.local:
+ [ -r /etc/rc.conf.local ]
+ _rc_conf_loaded=true
+ [ -n bluetooth ]
+ _d=/etc
+ [ -f /etc/rc.conf.d/bluetooth ]
+ [ -d /etc/rc.conf.d/bluetooth ]
+ _d=/usr/local/etc
+ [ -f /usr/local/etc/rc.conf.d/bluetooth ]
+ [ -d /usr/local/etc/rc.conf.d/bluetooth ]
+ hccontrol=/usr/sbin/hccontrol
+ hcseriald=/usr/sbin/hcseriald
+ run_rc_command start ubt0
+ _return=0
+ rc_arg=start
+ [ -z bluetooth ]
+ shift 1
+ rc_extra_args=ubt0
+ _rc_prefix=''
+ eval '_override_command=$bluetooth_program'
+ _override_command=''
+ command=''
+ _keywords='start stop restart rcvar enabled describe extracommands '
+ rc_pid=''
+ _pidcmd=''
+ _procname=''
+ [ -n '' ]
+ [ -z start ]
+ [ start '=' enabled ]
+ [ -n '' ]
+ eval 'rc_flags=$bluetooth_flags'
+ rc_flags=''
+ eval '_chdir=$bluetooth_chdir' '_chroot=$bluetooth_chroot'
'_nice=$bluetooth_nice' '_user=$bluetooth_user'
'_group=$bluetooth_group' '_groups=$bluetooth_groups'
'_fib=$bluetooth_fib' '_env=$bluetooth_env'
'_prepend=$bluetooth_prepend'
'_login_class=${bluetooth_login_class:-daemon}'
'_oomprotect=$bluetooth_oomprotect'
+ _chdir='' _chroot='' _nice='' _user='' _group='' _groups='' _fib=''
_env='' _prepend='' _login_class=daemon _oomprotect=''
+ [ -n '' ]
+ [ -z '' ]
+ eval
+ [ start '!=' start ]
+ [ -n '' -a start '!=' rcvar -a start '!=' stop -a start '!=' describe ]
+ [ -n '' -a start '=' stop -a -z '' ]
+ [ start '=' start -a -z '' -a -n '' ]
+ eval '_cmd=$start_cmd' '_precmd=$start_precmd' '_postcmd=$start_postcmd'
+ _cmd=bluetooth_start _precmd='' _postcmd=''
+ [ -n bluetooth_start ]
+ _run_rc_precmd
+ check_required_before start
+ local _f
+ return 0
+ [ -n '' ]
+ check_required_after start
+ local _f _args
+ _args=ng_bluetooth
+ load_kld ng_bluetooth
+ local _loaded _mod _opt _re
+ getopts e:m: _opt
+ shift 0
+ [ 1 -ne 1 ]
+ _mod=ng_bluetooth
+ _loaded=false
+ [ -n '' ]
+ kldstat -q -m ng_bluetooth
+ _loaded=true
+ true
+ debug 'load_kld: ng_bluetooth kernel module already loaded.'
+ return 0
+ _args=ng_hci
+ load_kld ng_hci
+ local _loaded _mod _opt _re
+ getopts e:m: _opt
+ shift 0
+ [ 1 -ne 1 ]
+ _mod=ng_hci
+ _loaded=false
+ [ -n '' ]
+ kldstat -q -m ng_hci
+ _loaded=true
+ true
+ debug 'load_kld: ng_hci kernel module already loaded.'
+ return 0
+ _args=ng_l2cap
+ load_kld ng_l2cap
+ local _loaded _mod _opt _re
+ getopts e:m: _opt
+ shift 0
+ [ 1 -ne 1 ]
+ _mod=ng_l2cap
+ _loaded=false
+ [ -n '' ]
+ kldstat -q -m ng_l2cap
+ _loaded=true
+ true
+ debug 'load_kld: ng_l2cap kernel module already loaded.'
+ return 0
+ _args=ng_btsocket
+ load_kld ng_btsocket
+ local _loaded _mod _opt _re
+ getopts e:m: _opt
+ shift 0
+ [ 1 -ne 1 ]
+ _mod=ng_btsocket
+ _loaded=false
+ [ -n '' ]
+ kldstat -q -m ng_btsocket
+ _loaded=true
+ true
+ debug 'load_kld: ng_btsocket kernel module already loaded.'
+ return 0
+ return 0
+ return 0
+ _run_rc_doit 'bluetooth_start ubt0'
+ debug 'run_rc_command: doit: bluetooth_start ubt0'
+ eval 'bluetooth_start ubt0'
+ bluetooth_start ubt0
+ local _file
+ dev=ubt0
+ hook=hook
+ expr ubt0 : 'ubt\([0-9]\{1,\}\)'
+ unit=0
+ [ -z 0 ]
+ bluetooth_device_authentication_enable=0
+ bluetooth_device_class=ff:01:0c
+ bluetooth_device_connectable=1
+ bluetooth_device_discoverable=1
+ bluetooth_device_encryption_mode=0
+ bluetooth_device_hci_debug_level=3
+ bluetooth_device_l2cap_debug_level=3
+ /usr/bin/uname -n
+ bluetooth_device_local_name='starker (ubt0)'
+ bluetooth_device_role_switch=1
+ _file=/etc/defaults/bluetooth.device.conf
+ bluetooth_read_conf /etc/defaults/bluetooth.device.conf bluetooth_device_
+ local _err _file _line _namespace
+ _file=/etc/defaults/bluetooth.device.conf
+ _namespace=bluetooth_device_
+ _err=0
+ [ ! -e /etc/defaults/bluetooth.device.conf ]
+ [ ! -f /etc/defaults/bluetooth.device.conf -o ! -r
/etc/defaults/bluetooth.device.conf ]
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ continue
+ read _line
+ [ -z '' ]
+ continue
+ read _line
+ return 0
+ _file=/etc/bluetooth/ubt0.conf
+ bluetooth_read_conf /etc/bluetooth/ubt0.conf bluetooth_device_
+ local _err _file _line _namespace
+ _file=/etc/bluetooth/ubt0.conf
+ _namespace=bluetooth_device_
+ _err=0
+ [ ! -e /etc/bluetooth/ubt0.conf ]
+ return 0
+ bluetooth_setup_stack ubt0 hook
+ dev=ubt0
+ shift
+ hook=hook
+ shift
+ ngctl mkpeer ubt0: hci hook drv
+ ngctl name ubt0:hook ubt0hci
+ ngctl msg ubt0hci: set_debug 3
+ ngctl mkpeer ubt0hci: l2cap acl hci
+ ngctl name ubt0hci:acl ubt0l2cap
+ ngctl msg ubt0l2cap: set_debug 3
+ ngctl connect ubt0hci: btsock_hci_raw: raw ubt0raw
+ ngctl connect ubt0l2cap: btsock_l2c_raw: ctl ubt0ctl
+ ngctl connect ubt0l2cap: btsock_l2c: l2c ubt0l2c
+ /usr/sbin/hccontrol -n ubt0hci reset
+ return 1
+ bluetooth_shutdown_stack ubt0
+ dev=ubt0
+ ngctl shutdown ubt0hci:
+ ngctl shutdown ubt0l2cap:
+ return 0
+ err 1 'Unable to setup Bluetooth stack for device ubt0'
+ exitval=1
+ shift
+ [ -x /usr/bin/logger ]
+ logger '/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack
for device ubt0'
+ echo '/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for
device ubt0'
/etc/rc.d/bluetooth: ERROR: Unable to setup Bluetooth stack for device ubt0
+ exit 1

[Maksim Yevmenkin]

Graham,

Post by Graham Menhennitt

Post by Maksim Yevmenkin
can you also please try to start it manually and see where it stops?
i.e. something like
# sh -x /etc/rc.d/bluetooth start ubt0

Thanks for responding. The output of that command is below. I'll do some
more diagnosis when I get home tonight.

thanks a lot

[...]

Post by Graham Menhennitt
+ /usr/sbin/hccontrol -n ubt0hci reset
+ return 1

so, "reset" command failed :( can you please tell me which exact
broadcom device you have, i.e. vendor id and product id? some broadcom
devices may require firmware download. you said it was working before,
can you please tell if you had to download firmware before? i.e. use
ubtbcmfw ? are you dual booting between freebsd and windows (or
linux)?

thanks!
max

[Graham Menhennitt]

Post by Graham Menhennitt

Post by Graham Menhennitt

Post by Maksim Yevmenkin
can you also please try to start it manually and see where it stops?
i.e. something like
# sh -x /etc/rc.d/bluetooth start ubt0

Thanks for responding. The output of that command is below. I'll do some
more diagnosis when I get home tonight.

+ /usr/sbin/hccontrol -n ubt0hci reset
+ return 1
so, "reset" command failed :( can you please tell me which exact
broadcom device you have, i.e. vendor id and product id? some broadcom
devices may require firmware download. you said it was working before,
can you please tell if you had to download firmware before? i.e. use
ubtbcmfw ? are you dual booting between freebsd and windows (or
linux)?

dmesg shows:

ubt0: <Broadcom USB Bluetooth Dongle, class 224/1, rev 1.10/0.01, addr 2> on usbus6

usbconfig dump_device_desc shows:
ugen6.2: <USB Bluetooth Dongle Broadcom> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x00e0 <Wireless controller>
bDeviceSubClass = 0x0001
bDeviceProtocol = 0x0001
bMaxPacketSize0 = 0x0040
idVendor = 0x0a5c
idProduct = 0x200a
bcdDevice = 0x0001
iManufacturer = 0x0001 <Broadcom>
iProduct = 0x0002 <USB Bluetooth Dongle>
iSerialNumber = 0x0003 <2035B0000001>
bNumConfigurations = 0x0001


No, I don't dual boot anything. I have never loaded firmware - maybe it happened automatically in the past, but I've never used ubtbcmfw explicitly.

Thanks for your help,
Graham

[Maksim Yevmenkin]

Graham,

Post by Graham Menhennitt

Post by Graham Menhennitt

Post by Graham Menhennitt

Post by Maksim Yevmenkin
can you also please try to start it manually and see where it stops?
i.e. something like
# sh -x /etc/rc.d/bluetooth start ubt0

Thanks for responding. The output of that command is below. I'll do some
more diagnosis when I get home tonight.

+ /usr/sbin/hccontrol -n ubt0hci reset
+ return 1
so, "reset" command failed :( can you please tell me which exact
broadcom device you have, i.e. vendor id and product id? some broadcom
devices may require firmware download. you said it was working before,
can you please tell if you had to download firmware before? i.e. use
ubtbcmfw ? are you dual booting between freebsd and windows (or
linux)?

[...]

Post by Graham Menhennitt
ugen6.2: <USB Bluetooth Dongle Broadcom> at usbus6, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (100mA)
idVendor = 0x0a5c
idProduct = 0x200a

thanks! so, it does not look like it needs firmware download.

Post by Graham Menhennitt
No, I don't dual boot anything. I have never loaded firmware - maybe it
happened automatically in the past, but I've never used ubtbcmfw explicitly.

right. i does not appear that you have to do anything here. can you
please modify /etc/rc.d/bluetooth and make sure it does not exit when
hci reset command fails? it would be useful to know if any other hci
commands fail.

thanks!
max

[Graham Menhennitt]

Post by Maksim Yevmenkin
please modify /etc/rc.d/bluetooth and make sure it does not exit when
hci reset command fails? it would be useful to know if any other hci
commands fail.

Max,

Last night I updated to the latest -current source and did a build of
world and kernel. The problem seems to have disappeared! So, either
there was something broken in the source when I did my previous update,
or something went wrong in my last build/install. Either way, it's all
working now. Thanks very much for your assistance, and I'm sorry for the
noise.

Thanks again,
Graham

# hccontrol -n ubt0hci inquiry
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: 00:80:25:1d:19:16
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 00:1f:04
Clock offset: 0x4578
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: 00:80:25:1d:19:16
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 00:1f:04
Clock offset: 0x4578
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: 00:80:25:1d:19:16
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 00:1f:04
Clock offset: 0x4578
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: 00:80:25:1d:19:16
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 00:1f:04
Clock offset: 0x4578
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: 00:80:25:1d:19:16
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 00:1f:04
Clock offset: 0x4578
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: 00:80:25:1d:19:16
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 00:1f:04
Clock offset: 0x4578
Inquiry complete. Status: No error [00]

[Maksim Yevmenkin]

Graham,

Last night I updated to the latest -current source and did a build of world
and kernel. The problem seems to have disappeared! So, either there was
something broken in the source when I did my previous update, or something
went wrong in my last build/install. Either way, it's all working now.
Thanks very much for your assistance, and I'm sorry for the noise

ok. thank you for letting me know.

thanks!
max